• asbestos@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    1
    ·
    edit-2
    2 days ago

    “As the mmWave sensor enters a low-power state when no motion is detected, it allows the Aqara FP300 to have a 2 year battery life while being powered by a pair of button cell CR2450 batteries.”

    Reading through the marketing bullshit since this is the only number mentioned: It’ll last 2 years if there’s nobody ever in that room. In reality, it’ll last a few months at best and probably less than that if there’s people constantly in the room, as the mmWave sensor will need to be powered non-stop.

  • Ebby@lemmy.ssba.com
    link
    fedilink
    English
    arrow-up
    3
    ·
    2 days ago

    Neat multi-sensor gizmo. I just started with ZigBee stuff in home automation and this seems like it has a lot of possibilities. However, I passed over Aqara in general as they seem to work only with their own hubs. If I’m wrong, let me know, but I try to avoid product lock-in.

    • MoonlightFox@lemmy.world
      link
      fedilink
      English
      arrow-up
      10
      ·
      2 days ago

      I have about thirty Aqara sensors that work with the Zigbee dongle for Homeassistant. I just pressed the sync button on the Aqara sensor and it shows up in my HA when I try to add a new Zigbee device.

      I can confirm that the magnet sensor, temperature/ humidity sensor and vibration sensors work without an Aqara hub, and directly with the HA ZigBee dongle.

      • Ebby@lemmy.ssba.com
        link
        fedilink
        English
        arrow-up
        3
        ·
        2 days ago

        Oh thanks! That’s great news. Every box I’ve read says it needs the Aqara hub or doesn’t work with 3rd party hubs. Especially on Amazon.

      • Jakor@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        2 days ago

        Their ceiling light (T1M) works but you lose some functionality - basically can’t use animations for the ring light. Besides that it’s been solid for me.

        • flying_mechanic@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          21 hours ago

          I think all the animations are executed hub side so they don’t show up on the ZHA/Zigbee2MQTT. Or they just aren’t mapped (yet)

          • Jakor@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            9 hours ago

            You’re probably right. Would be cool to have on z2m, but it’s a pretty minor feature that I don’t think I’d use in reality.

            • flying_mechanic@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              4 hours ago

              I would if it was available to add extra info/context to any automation that uses the light for status. That said I really do like these lights and will probably end up with more of them sooner than later.