St3alth@lemmy.ml to Asklemmy@lemmy.mlEnglish · 23 hours agoForklift drivers, what's one thing that you've done by accident that's always stuck with you since it happened?message-squaremessage-square55fedilinkarrow-up182arrow-down10file-text
arrow-up182arrow-down1message-squareForklift drivers, what's one thing that you've done by accident that's always stuck with you since it happened?St3alth@lemmy.ml to Asklemmy@lemmy.mlEnglish · 23 hours agomessage-square55fedilinkfile-text
minus-squareBrujones@lemmy.worldlinkfedilinkarrow-up11·16 hours agoI was using the forks as a workbench to cut a piece of 1/2" steel with an acetylene torch. I thought I had enough overhang to make it work. Those forks ended up about 1.5" shorter after I finished my cut.
minus-squaregolden_zealot@lemmy.mllinkfedilinkEnglisharrow-up9·16 hours agoSorry, but BOTH forks!? How did you not notice the first one falling off?
minus-squareBrujones@lemmy.worldlinkfedilinkarrow-up6·13 hours agoHaha, that’s a good call. I certainly should have. I was pretty new with the torch so I suppose I was focused on the task at hand. And it was just the tip™️. The last inch or 2 on the fork of a small lift won’t make a lot of noise compared to the torch.
minus-squareace_garp@lemmy.worldlinkfedilinkarrow-up2·11 hours agoChisel-toe tines are all the rage, this season!
I was using the forks as a workbench to cut a piece of 1/2" steel with an acetylene torch. I thought I had enough overhang to make it work.
Those forks ended up about 1.5" shorter after I finished my cut.
Sorry, but BOTH forks!?
How did you not notice the first one falling off?
Haha, that’s a good call. I certainly should have. I was pretty new with the torch so I suppose I was focused on the task at hand.
And it was just the tip™️. The last inch or 2 on the fork of a small lift won’t make a lot of noise compared to the torch.
Chisel-toe tines are all the rage, this season!